Starter credits added when you sign up.

ブリキの紳士武器を鋳造

Sztuka AI „ブリキの紳士武器を鋳造” autorstwa ののの na PixAI. Utworzono z Tsubaki.3.

Contest Entry

PixAI × zeta Original Character Creation Contest 2026 #zetaCollab

Opublikowano Nov 2, 2026

ののの

Więcej do zobaczenia

1robot, solo, blacksmith robot, steampunk, helmet, mono-eye, single glowing eye, top hat, black jacket, jacket draped over shoulders, sleeves empty, exposed pipes, exposed wiring, malfunctioning arm, cracked arm plating, leaking steam, hammer arm, giant iron hammer, forging, making a sword, gripping sword blade with tongs, anvil, sparks, glowing hot steel, sparks flying, looking at object, leaning forward, from side, dutch angle, cowboy shot, warm forge light, dark workshop, depth of field, detailed metal, rivets, brass fittings, soot, steam wisps, dynamic angle, A low dutch-angle cowboy shot from the robot's left side, the camera tilted so the anvil and the raised hammer cut diagonal lines across the frame: a single steampunk blacksmith robot leans forward over a squat iron anvil in the near midground, its weight settled on the right leg with the left leg braced back, spine angled down toward the work. On the robot's right side the arm terminates in a massive blocky iron hammer, its head pitted and blackened, swung down in a half-completed stroke so the hammer face hangs just above a sword blade held flat on the anvil; the blade is gripped at the tang by a pair of long-handled tongs clamped in the same right-side assembly, so the hammer and the tongs are two tools on one arm, and the glowing orange-white blade sends a thin curl of heat-shimmer upward. The left arm is the failing one: the shoulder joint is wrenched and the upper casing split open, a bundle of tarnished brass pipes and frayed copper wiring spilling out and hanging slack, one loose pipe joint hissing a thin jet of white steam that drifts across the robot's chest; the forearm below the break hangs crooked and twitches, its fingers half-curled and a small gear visibly jammed out of its socket. The head is a rounded riveted steel helmet welded to the torso with no neck, and set into its front is a single large circular mono-eye with a glowing amber lens, a hairline crack running across the glass, focused down on the sword blade; a black silk top hat with a worn brim and a soot-smudged band sits square on the helmet's crown, tipped a few degrees from the hammer's motion. Over the shoulders a black leather jacket is draped and not worn, sleeves empty and swinging behind the back, its collar riding up around the helmet's base and one shoulder sliding half off as the arm swings. Contact points: the tongs clamp the blade, the blade's flat lies on the anvil's face, the hammer's face hovers directly over the blade's spine, the left boot's flat sole presses the floor, the empty jacket sleeve brushes the split shoulder casing. A shower of sparks sprays off the anvil top and arcs away to the lower right, each spark trailing a brief curved tail, and a scatter of dead black scale and curled metal filings litters the anvil's near edge; the floor beneath is pitted with hammer dents. The forge fire is the only light source, burning low and orange in a brick hearth behind the robot's back right, so the front of the mono-eye and the underside of the top hat's brim are lit warm and the robot's far side falls into deep brown-black shadow while the sparks throw tiny hard highlights down their paths; the workshop behind recedes into unlit clutter of hanging chains, a quench barrel and stacked ingots, edges dissolving into gloom. Palette held to forge orange, ember red, blackened iron, tarnished brass and soot brown, with no cool colours admitted, and the black leather, black felt and steel all separating only by the strength of the firelight. Sweat of condensation beads on the cold pipes but not on the hot blade. Grimy, industrious.

ブリキの紳士武器を鋳造

Komentarze

Model i LoRA użyte

Podobne obrazy

Odkryj więcej

Polecani użytkownicy

Może Ci się spodobać